Babyproofing shallow drawers
Measure where the latch would sit. A shallow drawer might have room for the housing yet leave nowhere for the catch to land, or too little room under the counter for an adult to press the release. The distance from the front of the drawer to the back answers only part of the question.
Go to the measurement sheet
The counter projects past the front. Inside, height and clear reach run in different directions.

The dashed line marks the closed front. The lower bracket shows how far the drawer has moved.

KidCo lists a 2-inch body height and 1½-inch internal reach. Its guide shows engagement after about 1 to 1½ inches of opening.
S337 dimensions from KidCo’s product sheet and installation guide.
From Knee Height editors · Sources checked November 17, 2026
Find the working drawer behind the decorative face
Open the drawer and sight along its upper edge. Which parts travel with it? Which rail stays under the counter? Check for screw heads, slides and a handle screw where the latch plate would sit. On a false front, such as the fixed panel in front of a sink, first find the opening that actually gives access to the cabinet.
Mark whether this is a top drawer directly under a worktop or a lower drawer. An identical front one position down can need a different release arm.
Sources · Qdos top-drawer guide, pages 1–5 · Qdos lower-drawer and door guide, pages 1–5
Five measurements for one drawer
Record the drawer location and proposed latch position on your sheet. Take the measurements there and write the units beside each one. For a latch you do not own, use its drawing to identify the release point. Leave an unknown blank until you can check it.
Drawer measurement sheet
Use one sheet per drawer. Write the unit beside each value (inches or millimeters). Mark anything you cannot check as “unknown.”
Select this sheet, then choose Print in your browser to print the sheet on its own.
- Drawer location and position
- Lock model and manual revision
- Vertical spaceValue and unit
At the proposed housing position, measure between the surfaces that limit its height.
- Clear internal reachValue and unit
Measure inward from the mounting surface to the first obstruction in the latch’s path.
- Frame-to-box gapValue and unit
Measure vertically from the underside of the fixed frame to the top of the drawer box.
- Countertop overhangValue and unit
With the drawer closed, measure horizontally from its outside face to the counter’s front edge.
- Opening travelValue and unit
From the closed position, record how far the front moves before the hook engages, if a latch is fitted.
What still needs checking against the manual?
Model example · KidCo S337. See body height and internal reach and opening at engagement. Sources checked November 17, 2026.
What the three KidCo measurements mean
For its S337 four-pack, KidCo lists a body 2 inches high and separately gives the lock an internal reach of 1½ inches. Use the body dimensions to check for nearby obstructions. Use the reach to locate the hook relative to the catch. The installation sheet then asks for engagement after roughly 1 to 1½ inches of opening. That last distance is the drawer moving toward you.
Suppose the drawer has 2 inches of vertical room where you want the latch. You have compared just its height. You still need to place the rest of the body, find a screw mounting face and reach the hook when it catches.
Sources · KidCo S337 product specifications, body dimensions and reach · KidCo S337 package, installation figure 2 and operation
Can your fingers reach under the worktop?
Safety 1st warns that a countertop projecting 1 inch or more over a top drawer may make the HS395 latch hard to reach. Try following the path from the edge of the worktop to the release in the drawing before you attach anything.
For the screw-mounted Safety 1st 48392 ten-pack, the guide places engagement at about 1½ inches of drawer opening. Its locating template sticks in place while you mark screw holes. Its 1½-inch figure describes outward travel. You still need to check the height inside the drawer.
Sources · Safety 1st HS395–HS397, countertop overhang warning · Safety 1st 48392, drawer installation and engagement
Choose the right Qdos arm and template position
The long arm on Qdos 17-10013 is for a top drawer directly beneath a countertop. The product page mentions doors under counters, but the installation guide excludes all doors and lower drawers because the long arm leaves too large an opening. The shorter 17-10014 is for lower drawers and cabinet doors. Both guides require the standard face-framed layout illustrated on page 3.
Step 2 uses the vertical distance from frame to drawer box to choose a mounting-plate position. The bands are 0–¾ inch, ¾–2 inches and over 2 inches. Use the supplied template at a boundary. In drawer setup 2B the plate has only partial support and requires the specified screw, even though the product is sold as an adhesive latch.
Sources · Qdos 17-10013 instructions, pages 1, 3 and Step 2 · Cardinal Gates description of the Qdos top-drawer latch · Qdos 17-10014 instructions for lower drawers and doors
Write down the one thing you still need
“Top drawer, 1¼-inch countertop projection, release location unknown” is enough to pause an HS395 purchase. The next question for Safety 1st is whether an adult can operate the release in that layout. If there is no rail where the diagram puts the catch, send an open-drawer photo and ask about that mounting face first. Keep restricted contents elsewhere while you check.