Skip to content
From Knee Height

Babyproofing guides for the home you have.

Babyproofing cabinets without handles

Count the moving fronts first. A smooth single door, two doors meeting at a seam and a drawer offer different places for a lock to grip. Without projecting knobs or pulls, look for a documented inside catch, an exposed side for a strap, or a double-door lock that uses the frame.

What opens from the front?Illustration, not to scale.
One smooth door — schematic viewOne smooth door

Open it to look for an interior landing that stays still as the door swings.

A pair of doors — schematic viewA pair of doors

Look into the center seam. Record the gap, any overlapping lip and the structure behind it.

A recessed pull — schematic viewA recessed pull

The finger recess leaves no projecting knob. Check the space behind and above the drawer front.

From Knee Height editors · Sources checked November 17, 2026

What opens when you put your hand on the front?

A recessed finger pull or a groove along the top edge may give an adult a good grip without providing anything for a guard to loop around. The KidCo S342 package shows a guard passing around hardware on two adjacent doors. Set it aside for a smooth pair, a lone door or a drawer without that arrangement.

On a push-to-open front, watch the movement as you press and release it. Note the direction of travel and the location of the existing push latch. Any new hardware has to clear that mechanism as well as the hinge or drawer runner.

Sources · KidCo S342 package, illustrated placement on adjacent hardware

Match the device to what it grips

Before choosing a release you like, locate both halves of the mechanism on the actual cabinet. With the front shut, consider where you will put your hand or key each time you open it.

What you haveWhat the lock needsWhat to check
Smooth single front, magnetic releaseSafety 1st HS292 uses a fixed catch and a lock on the inside of the moving front.Hold the original key and lock across the intended spot and check that the button retracts before attachment. Its guide excludes dangerous substances and sharps.
Smooth door or drawer, manual releaseSafety 1st HS395 uses a fixed hinged catch and an arm on the moving front.Locate the frame or box surface shown in its guide and check finger access with the front partly open.
Two doors on a face frameThe white Qdos 17-10001 uses the frame and the door edges. The handles play no part.Check the center seam and the center-post or open-frame drawing before peeling any liners.

Sources · Safety 1st HS292 guide, warnings and pre-installation key check · Safety 1st HS395–HS397 guide, mounting and operation · Qdos double-door lock, Steps 1 through B3

Check both edges of a handleless door pair

Open each door in turn and look along the edge where it meets its neighbor. If one door has a lip that passes behind the other, the Qdos double-door lock is excluded. Its arm is ⅛ inch thick and Qdos asks for a slightly wider space between doors. A seam of ⅛ inch or less rules this model out.

The 17-10001 is for standard face-framed pairs. One installation fixes a catch behind the frame above the open middle. The other uses the center post and a catch selected against the actual door thickness. Rehearse the appropriate drawing with the liners on. The removable cap has a separate storage post that belongs beyond children’s reach. Qdos excludes using this lock for toxic or dangerous substances or sharp objects.

Sources · Qdos double-door guide, cabinet types, catches, storage and warnings · Cardinal Gates, Qdos double-door lock requirements · Original Qdos FAQ, door gap and arm thickness

Is there an exposed side for a strap?

For the single white Safety 1st HS270 strap, look around the corner of the cabinet. The instructions put the pivot on the side and the lock housing at the front. A cabinet fitted tight against its neighbor may offer a broad front and no exposed side at all.

Use the rev. F drawing to check placement with both liners still on. It illustrates an opening under 1 inch and prohibits a gap over 1 inch. Check both contact surfaces and the cabinet maker’s advice for their finishes. Permanent removal ends use of this strap, so it matters whether this is a workable location before you attach it.

Sources · Safety 1st HS270 rev. F, placement, opening and removal

When the push mechanism is still a mystery

Photograph the catch and hinge side with the door open, then the seam with it closed. Include the cabinet maker’s markings, any model number and the distance the front moves inward before it releases. Ask the hardware maker to identify a matching arrangement. Until that is resolved, use the cabinet for items the child may access or move restricted contents to suitable storage.

Sources · CPSC storage guidance for medicines and cleaning products

Check the exact model

As an Amazon Associate I earn from qualifying purchases.

Safety 1st Secure-to-Explore Adhesive Locks · HS395

4 locks, white. The hinged catch changes position for framed and frameless cabinets. Check space for the latch and for adult release before attaching it. For a framed installation, its guide specifies a minimum frame height of 1.35 inches (3.4 cm). Read the manufacturer’s instructions.

Buy on Amazon